New OPCOM 2021 with USB Dongle Op-Com V1.95 Flash Update Op Com V2021 FTDI PIC18F458 Car Diagnostic Tool Fast Shipping
Newest opcom 2021 Highlights :
0)You need to connect blue usb dongle,then open software
1) newest software professional 200603a. can work forOpel cars to 2021.
2) Supported languages: English
3) Firmware Version: Real V1.95,support flash update
4)work on Windows 7 32 bit/64 bit
5) OPCOM 2021 professional 200603a is with real pic18F458 FTDI FT232RQ chip
Warm Tips :
1. If your CD was broken or can not readable, please contact us for software download link. Do Not Open Dispute Or leave Negative Feedback,Thanks!!!
2. Please disconnect internet and close anti-virus software when you install or use the opcom software.
3. 2021 USB dongle only work with upgradable opcom v1.95 !
Functions:
1.read out and clear fault codes
2. Engine
3.Automatic Transmission
4.ABS
5.Airbag
6.Engine Cooling module
7.Instrument Cluster
8.Electronic Climate Control
9.Body Control Unit
10.reset, and program ECM
11.reset, and program BCM
12.reset, and program IPC
Features:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bo-sch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
FAQ:
Q: Does this product has any other language other than English?
A: This product have only English version.
Q:What we can do with this device?
A:1. You will get a feedback on the state of the activated output. This will helps you to find the failed. Components more easily. With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking.
2. You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
3. You will need the vehicle security code, which can be found on the CAR-PASS.
4. You can also reset, and program the Service interval reminder for Astra-G/Zafira/Corsa-C/Meriva
5. You can code SAB6, and SAB8 airbags with the software.
6. The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
7. The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.
